How To Deep Clean Hardwood Floors

Hardwood floors do not just add a rustic charm to the homes but they are also very easy to clean and that is one of the main reasons behind their popularity. A vacuum cleaner and a dry mop are all you need to maintain your hardwood floors on a day-to-day basis. For accidental spills, a good tissue paper is enough. However, once in a while giving some extra love to the hardwood floors is recommended. 

Regular cleaning will help you get rid of the superficial dust, dirt, and debris from the floors but to tackle old and stubborn stains from the floors, deep cleaning once every couple of months is necessary. 

So, if you have hardwood floors in your home and are planning for deep cleaning this time, then this article will prove helpful for you.

What You Need to Deep Clean Your Hardwood Floors?

Deep cleaning the hardwood floors is not too tough but you need to be ready with all the necessary supplies before you start with the cleaning.

  • Vacuum cleaner – You will need it to prep the area for deep cleaning.
  • Microfiber pads – Keep spare microfiber pads nearby as you will definitely need more than one.
  • Wet/dry mop – It is best to go for a two-in-one spray that will help you to dry wipe using microfiber pads as well as go for light spritzing the cleaner during the deep cleaning. 
  • Putty knife – Buy it if your floor has cracks.
  • Wood floor cleaner – It is best to avoid generic cleaners and go for a premium quality cleaner that is specifically meant for wooden surfaces. 

Easy Steps to Deep Clean Your Hardwood Floors

Deep cleaning the hardwood floors is not too different from regular cleaning. It is just that in this case, you will require the usage of a good cleaner and water. 

1. Prep the floors

Before you deep clean the hardwood floors, you need to prep your floors with some regular cleaning. Vacuum the floors to get rid of all the superficial dirt and debris from the surface. Do not miss out on the corners and the other hard-to-reach portions of the room. If your floors have deep grooves in between the boards, loosen the debris using a putty knife. This will help to vacuum the floor easily. 

Once you are done with vacuuming, mop the floors using a clean microfiber pad (keep the spray for the next step). Do it in the direction of the floorboards and get rid of any grime or fine dust. 

2. Mop the floors

Once you are done with the usual mopping, it is time to mop using a good wood cleaning solution of your choice. If you are using a microfiber pad that only has a dry setting, then spray the cleaner on the floor and start mopping in the direction of the flashboards. Continue spraying and mopping until you have covered the full floor. 

It is important to avoid over-spraying the floors. This is because moisture is not a friend of wooden floors and too much moisture can cause damage. Also, it is recommended that you change the microfiber pad at least once during the whole process. Make the change when the pad starts looking gross and gray. 

3. Dry the floors

If you feel that the floors are still damp, then wipe the area using a dry and clean microfiber pad. Make sure you have gotten rid of all of the moisture.

4. Do the polish

This step is completely optional since deep cleaning will make your floors squeaky clean but if you want to take an extra step and make your hardwood floors look as good as new, then you can go for the polish. Choose the correct polish depending on the type of hardwood floor you have. Then consider the guidelines given by the manufacturer and get your work done.

5. Spot Treat Stains If Needed

In most cases, the above-mentioned steps will be enough to deep clean the hardwood floors. But at times the deep cleaning process has to include spot treating the stains if the marks on the floor are too stubborn. Below are two cleaning methods that you can use to get rid of the stubborn stains on your floors. You can use which one to go for depending on the kind of finish you have on your hardwood floors. 

a. Use baking soda

If you have a urethane finish on your hardwood floor, then most of the time you may not have to worry about stains as they are usually resistant to stains. But once in a while stains can occur and, in that case, using baking soda is a great choice. 

The cleaning process is simple. You just have to make a paste of a slightly gritty and thick consistency with baking soda and water. Then apply the paste to the concerned spot and then with the help of a clean microfiber cloth rub the paste over the spot gently. Wait for about 15 minutes for the paste to work on the stain and then wipe with a damp cloth. Dry the spot at the end.

b. Use steel wool and wax

If you have a hardwood floor with a softer finish, it is more prone to having stains. To remove stains in this case, dip steel wood in floor wax and then rub the concerned spot in a gentle manner. Continue till the stains are gone. 

This cleaning technique is usually effective for treating all kinds of spots but it is important that you know the kind of finish you have on your hardwood floors before using it. For example, if your floors have a urethane finish, do not use it as it will damage the floors. 


As you can see, deep cleaning the hardwood floors is very easy with the right tools and the right techniques. As far as the cleaners are concerned, avoid the ones containing harsh chemicals as they will damage the finish of the floors.