With growing interest in sustainable practices, people are turning to eco-friendly roofing solutions such as built-up roofing (BUR). BUR is used for roofs made up of multiple layers of materials, typically corrugated metal sheets and fiberglass. The benefits of using BUR over traditional roofs include:
- Reduced energy use – BUR typically uses less material than traditional roofs, requiring less energy to build and maintain.
- Reduced climate change emissions – BURs are made from recycled materials, reducing the amount of waste produced during manufacturing.
- Reduced noise levels – Compared to traditional roofs, BURs typically produce negligible noise levels when installed.
What is Built-Up Roofing (BUR)
Built-up roofing is a type of material made up of several layers of materials, typically three. The top layer is a waterproof material such as asphalt or plastic, the middle layer is a felt-like material, and the bottom layer is a heavy-duty insulation material. This type of roofing is popular because it is weatherproof, has good sound and heat insulation, and can be painted or stained to match your home’s exterior.
Built-Up Roofing (BUR) Basics
Built-Up Roofing (BUR) is a type of roofing material made up of multiple layers of asphalt, plastic, or fiberglass. It was first used in the 1930s and has since become one of the most popular roofing materials in the world.
The benefits of using BUR include its low cost, versatility, and resistance to weathering and decay. Additionally, BUR has a wide range of colors and textures that can be customized to match any home or building.
To install BUR, you will need to determine your roof’s rafter height. Next, you will need to purchase the correct size of BUR rolls. Finally, you will need to prepare your roof surface by cleaning it and then coating it with a sealant. Once all of the preparations are complete, you can start Installation by following these steps:
- Mark the position of each rafter on the roof surface using a level.
- Cut the BUR rolls into the desired size and shape.
- Place a layer of BUR over the marked rafter positions on the roof surface.
- Align the edges of the BUR roll with the marked rafter positions and then press down firmly to
Where to Use Built-Up Roofing (BUR)
Originally designed as a waterproofing membrane for roofs, built-up roofing (BUR) has become an increasingly popular choice for home and business owners concerned about energy efficiency, long-term durability, and aesthetics.
Installation of BUR can be a DIY project for the experienced do-it-yourselfer or may require the services of a qualified contractor. Here are some tips on where to use BUR:
- As a waterproofing membrane: BUR is often used to waterproof roofs. It is also effective in protecting against wind and water damage.
- As a thermal barrier: BUR can be installed on roofs as a thermal barrier to reduce heat loss in the summer and winter months.
- As an aesthetic enhancement: BUR can be installed to give roofs an aesthetic upgrade.
Pros of Built-Up Roofing (BUR)
Built-Up Roofing is becoming more popular with homeowners and businesses as it offers many benefits over traditional roofing systems. Here are just a few of the reasons why you should consider installing this type of roofing:
- Built-Up Roofing is Durable: Unlike traditional roofs that can deteriorate quickly, a built-up roof can last for many years. This is because the system comprises multiple layers that are glued together, ensuring that the roof remains sturdy and leak-proof.
- Built-Up Roofing is Effective at Reducing Heat Gain: The multiple layers of the system block heat from entering your home in the summertime and keep it out in the winter. This reduces your energy bill and prevents your home from becoming too hot or too cold.
- Built-Up Roofing is Eco-Friendly: Since built-up roofing is made up of many small tiles, it does not require as much material as a traditional roof. This means that the system is more environmentally friendly and less likely to contribute to climate change.
Cons of Built-Up Roofing (BUR)
There are some cons to installing built-up roofing. For one, getting a good seal between the layers of protection can be difficult. Rain and snow can easily penetrate the system, leading to leaks and damage. Additionally, built-up roofing is often heavier than other types of roofing, which can lead to wind and snow loadings problems.
Benefits of Built-Up Roofing (BUR)
Built-Up Roofing (BUR) is a type of roofing made from layers of materials installed on top of one another. BUR provides many benefits over traditional roofs, including greater energy efficiency, reduced water usage, and increased wind and hail resistance. Here are four reasons to consider installing built-up roofing:
- Greater Energy Efficiency: Built-up roofs can be more energy efficient than traditional roofs due to their construction. BURs typically use less material than a traditional roof and are made up of multiple panels that can be installed in various configurations to optimize energy efficiency.
- Reduced Water Usage: BURs use less water than traditional roofs due to their construction. Each panel of BUR is made up of small pieces that can be installed without using an excessive amount of water or sealant. This also reduces the need for regular maintenance and repairs, saving you money in the long run.
- Increased Wind and Hail Resistance: Built-up roofs are designed to resist wind and hail damage better than traditional roofs. BURs use a variety of materials and construction techniques to make them more resistant to these elements, which can save you money on repairs down
How to Install Built-Up Roofing (BUR)
If you’re looking for an affordable and easy way to add a little extra insulation to your home, consider installing built-up roofing (BUR). BUR is a type of roofing comprised of several layers of asphalt, shingles, or tiles. It’s a great option for homes prone to leaks and needing extra insulation because the roof can act as a heat and water reservoir. Here are four tips on how to install BUR:
- Make sure the attic is properly insulated. If the attic is not properly insulated, the floor will be very warm in the winter and very cold in the summer. Proper insulation should be installed in the attic before installing BUR.
- Consult with an experienced contractor. Experienced contractors know how to install BUR correctly, so you don’t have to worry about any later problems.
- Plan ahead. Ensure you have all the materials you need before starting the installation process, so there are no delays.
- Be patient. BUR may take a few days to start insulating your home properly, so don’t be discouraged if it takes a little longer.